Will FIFO manage lot selection automatically?

Only within a correctly loaded lane. Staff still need lane assignments and batch selection rules when the same SKU occupies several lanes or incoming lots overlap.

Can Rio Rancho manufacturers use this for supplies?

Yes, if pallet construction, consumption and inventory depth suit gravity travel. Supplies with few reserve pallets may be better served by more directly accessible storage.

Do rollers need powered drives?

The pallets advance through gravity on inclined tracks. Braking components regulate that movement; the design must still match load weight and pallet contact rather than relying on gravity alone.

Should we choose the deepest possible lanes?

Not necessarily. Excess depth can strand positions behind slow inventory. Choose depth alongside pallets per SKU, required picking faces and the space needed for both aisles.

Pallet Flow Rack system inside a New Mexico warehouse

Rio Rancho, New Mexico

Pallet Flow Rack in Rio Rancho, NM

Pallet flow rack in Rio Rancho gives repeat products a gravity-fed path from rear replenishment to front withdrawal. Inclined rollers move each pallet toward the picking position, with brakes controlling its progress. Correct loading sequence supports FIFO for dated supplies, finished goods and high-volume SKUs that warrant dedicated storage lanes.

Semiconductor support and light manufacturing near the Intel Corridor can involve very different pallet footprints. Along Highway 528, we plan around the actual packaging, unit weights and building access rather than assuming every supplier handles identical loads. Separate loading and picking faces must fit the movement between receiving, production and dispatch.

(505) 436-7469

Gravity Flow Rack Checks for Production Loads

Describe the production rhythm

Share quantities released by production, receiving batch sizes and the number of pallets withdrawn per shift. Identify stock that must follow dates or lot order. These inputs show whether gravity lanes should serve replenishment supplies, finished goods or a clearly separated combination.

Check contact and travel

We review pallet samples or detailed measurements against proposed rollers. Minimum and maximum weights inform slope and braking choices. Film tails, projecting packaging and inconsistent bottom boards need attention before they become obstacles within a lane that operators cannot readily access.

Arrange the two work faces

The layout reserves distinct replenishment and picking aisles and considers forklift approach. We check the proposed depth against available room and SKU access, then define equipment quantities and managed installation responsibilities in the quotation for your review before ordering.

Verify movement before handover

After assembly, representative pallets are run through the specified lanes to check controlled advance and presentation. Operators receive the approved load parameters and sequencing guidance. Changes in pallet construction or product weight should trigger a review before those loads enter the system.

Pallet Flow Racking for Production Supply

An acceptable lane for a heavy finished-goods pallet may not move a lightly loaded supply pallet as intended. We consider both extremes when discussing roller spacing, slope and speed controllers. Pallet bottom boards receive the same attention as the merchandise because their contact with rollers determines how the unit travels.

Our operation is a division of Warehouse Equipment & Supplies Co.; supplying and installing storage equipment has been part of that business since 1997. Installation crews work under our management, with responsibilities established in the project scope. We coordinate the work area and access with your operating team.

For Northern Boulevard industrial buildings or fulfillment space serving City Center, replenishment frequency matters as much as storage count. A deep lane works best when one SKU consistently fills it. A broader assortment with fewer pallets per item may call for shorter lanes and more picking positions instead.

Describe the production rhythm

Check contact and travel

Arrange the two work faces

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Connect Storage with Production

Rio Rancho service area

Semiconductor support

Light manufacturing

Consumer goods distribution

Regional fulfillment

Pallet Flow Racking Lane Specifications

We establish lane depth from inventory peaks, withdrawals and receiving quantities. Allocating multiple lanes to a fast mover can separate incoming batches and sustain picking while another lane is replenished. That allocation needs an operating rule so the oldest available batch is selected across lanes, not merely within one.

Roller layout follows pallet construction, including bottom-board orientation and the spaces between boards. Unsupported sections or inconsistent contact can interfere with forward movement. We identify the intended pallet formats before choosing track arrangements, and discuss how your team will exclude damaged or incompatible pallets from the loading face.

Slope and braking are evaluated together. A steeper incline can increase driving force but also changes the demands on speed controllers. The specified combination must accommodate the approved load range, with discharge equipment presenting pallets for withdrawal and separation components included where the operating arrangement requires them.

A pushback lane returns pallets to the same aisle used for loading, generally creating LIFO storage. Pallet flow racking needs access at opposing ends to provide its FIFO path. We compare both options when aisle availability is tight, without treating their inventory rotation methods as interchangeable.

Describe the production rhythm

Check contact and travel

Arrange the two work faces

Verify movement before handover

Call (505) 436-7469