Is gravity storage right for every online SKU?

No. Repeated pallet quantities are a stronger fit than a broad assortment held one pallet at a time. Review assortment and reserve depth before allocating lanes.

Can we plan before occupying a Los Lunas building?

Yes. A building drawing and inventory profile allow preliminary layouts. Actual dimensions, access constraints and pallet details still need confirmation before the equipment arrangement is finalized.

What keeps a heavy pallet from accelerating?

Specified brakes or speed controllers regulate travel along the inclined rollers. Their selection depends on load weight, lane arrangement and the equipment manufacturer's application requirements.

Does FIFO eliminate inventory procedures?

No. The lane preserves its loading sequence, but receiving accuracy, date identification and selection between lanes remain operating responsibilities. Those practices are necessary for meaningful stock rotation.

Pallet Flow Rack system inside a New Mexico warehouse

Los Lunas, New Mexico

Pallet Flow Rack in Los Lunas, NM

Pallet flow rack in Los Lunas places reserve pallets behind a picking face and advances them on sloped roller tracks. Loading occurs at the opposite end, so the first pallet introduced is the first available for withdrawal. That FIFO arrangement suits dated stock and repeated withdrawals of high-volume SKUs.

For e-commerce fulfillment around Huning Ranch industrial and the I-25 / NM-6 interchange, an empty building still needs a defined inventory path. We position opposing replenishment and picking faces before committing to storage depth. Packing areas, receiving queues and dispatch movements must remain workable after the lanes are filled.

(505) 436-7469

Pallet Flow Rack Lanes for Fulfillment

The roller specification depends on pallet bottom boards, including their direction, width and condition. A board must contact the intended roller surfaces through the full journey. Pallets with missing members, excessive deflection or loose wrapping need screening before entry rather than being sent down a lane for trial during normal operations.

Light loads and heavy loads place different demands on gravity travel. We review the complete range to determine suitable lane slope and speed controllers. Brake placement must restrain loaded movement without preventing lighter approved pallets from advancing. Representative load checks help confirm the selected arrangement before routine use begins.

Lane depth and lane count are considered together for dated products. Several shorter lanes may support more batch separation, while deeper lanes commit more positions to each active SKU. FIFO within a lane does not decide which of several lanes contains the oldest batch; that remains part of warehouse sequencing.

Pushback can reduce the need for a second access aisle, but its shared loading and picking face normally means LIFO. Gravity flow rack uses opposing faces for FIFO presentation. If the building cannot accommodate that access pattern, we explain the tradeoff rather than suggesting the two systems rotate stock alike.

Build an inventory picture

Reserve circulation first

Specify the moving components

Coordinate a controlled release

Call (505) 436-7469

Gravity Flow Rack from Stock Data to Handover

Build an inventory picture

Gather current and expected pallets per SKU, product dates, receiving quantities and withdrawal patterns. Separate steady movers from promotional stock. A lane assigned to an occasional item can remain partly vacant while faster products compete for usable space elsewhere in the building.

Reserve circulation first

We place the loading face near the planned replenishment route and orient picking toward downstream work. Forklift approaches and opposing aisle needs establish the available storage envelope. Only then do we compare lane depths and the number of separately accessible product positions.

Specify the moving components

Pallet dimensions and bottom-board contact guide roller selection, while load weights inform pitch and braking. The equipment scope identifies guides, discharge arrangements and any separation devices. These components need to function as one lane assembly rather than as unrelated additions to storage frames.

Coordinate a controlled release

Managed crews install within the agreed area, followed by loaded movement checks using representative pallets. Handover addresses acceptable pallet condition, loading order and withdrawal practices. Staff should know how to report a stalled load without entering a lane or pushing pallets from unsafe positions.

Plan Pallet Flow Rack Before Filling the Building

We start with the number of pallets actually held for each item, not an ambition to fill every corner. Deep lanes can concentrate reserve inventory, but a changing online assortment may need more individual faces. The proposal weighs lane utilization against access to the products your team withdraws most often.

Supplying and installing since 1997, Warehouse Equipment & Supplies Co. is the parent business of our division. We manage installation crews and agree on the work sequence with your staff. Equipment selection and installation coordination stay connected, while the quoted scope establishes what is included before work is arranged.

In Los Lunas Industrial Park, a light assembly building may share storage with outbound finished goods. We examine whether incoming materials and outgoing pallets need separate lane groups. Mixing unrelated load formats in one specification can create travel problems even when the overall storage count appears to fit.

Build an inventory picture

Reserve circulation first

Specify the moving components