--- title: "Pushback Rack in Tijeras, NM" url: https://albuquerquepalletrack.com/service-area/tijeras/pushback-rack description: "Pushback rack in Tijeras for palletized contracting supplies. Review load weights, lane access, and new equipment options: 505-436-7469." lang: en --- Image: Pushback Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/pushback-hero-Dus20JX9.jpg) Tijeras, New Mexico # Pushback Rack in Tijeras, NM Pushback rack in Tijeras can group repeat palletized supplies while keeping loading and retrieval on one accessible face. Construction and contracting inventory needs a clear distinction between repeat packaged materials and irregular equipment. Only loads suited to the chosen carts should enter lanes intended for predictable pallet support and movement. The arrangement normally holds two to six pallets deep, using nested carts on inclined rails. Each incoming load pushes stored pallets farther back. Removing the nearest pallet allows the next cart to advance toward the aisle, creating last-in, first-out access rather than direct selection of every stored load. (505) 436-7469 ## Pushback Pallet Rack Load Review Steps 1 ### Separate pallets from irregular equipment Identify repeat packaged supplies, project allocations, and items without a consistent pallet base. Reserve lane planning for compatible loads and consider separate storage for equipment that cannot rest on the selected carts as intended. 2 ### Record the heaviest operating loads Provide loaded weights, dimensions, heights, and underside details for representative pallets. Include variations in packaging and weight distribution so the proposed cart arrangement and supporting structure address actual stored materials rather than a nominal product description. 3 ### Balance depth with order access Compare two- through six-deep options against usual pallets per SKU. Mark the materials needed independently for contractor orders, and retain selective access where removing other pallets first would interfere with the picking sequence. 4 ### Prepare delivery and handover We plan installation through managed crews with agreed routes and work boundaries. Review rated loads, pallet placement, and controlled retrieval during handover, and keep people out of lanes when inspecting any unexpected movement or obstruction. ## Pushback Rack Planning for Contracting Loads We consider loaded weight and pallet geometry before promising more storage positions. Pushback pallet rack can reduce the number of aisles compared with selective storage, yet a rear load cannot be retrieved independently. Repeat building supplies may fit that tradeoff; project-specific materials may warrant their own accessible positions. Our role as a division of Warehouse Equipment & Supplies Co. includes supplying and installing since 1997. We provide new equipment and manage installation crews, coordinating the material approach and agreed work areas with the access your daily operation still requires. Along Old Route 66 frontage and the South 14 corridor, examine the full handling route before positioning a storage block. Delivery approach, unloading space, and forklift turns influence where the single working face belongs. A deeper lane should not eliminate the staging needed to assemble contracting orders. Separate pallets from irregular equipment Record the heaviest operating loads Balance depth with order access Image: High-density pushback rack lanes loaded with pallets (https://albuquerquepalletrack.com/assets/pushback-2-ChZwIk2o.jpg) Image: Pushback pallet racking showing cart rails and load beams (https://albuquerquepalletrack.com/assets/pushback-3-ChKlQnZE.jpg) ### Leave Room to Assemble Orders Tijeras service area: https://albuquerquepalletrack.com/service-area/tijeras Construction and contracting Equipment storage Specialty distribution Light manufacturing ## Push Back Racking Support and Lane Choices Pushback rack components must be selected together: nested carts, inclined rails, supporting members, and the rack structure. Actual pallet contact points and load distribution matter as much as gross weight. Wrapped material that overhangs a pallet needs clearance review so neighboring loads and carts can move without interference. Choose lane depth from pallets per SKU, not the largest receipt expected once. Two-deep storage may suit materials held in modest repeats, while deeper lanes require enough matching pallets to occupy them. Separate project allocations can demand additional lanes even when the packaged product itself is identical. The beam pair per level carries the selected lane assembly through its specified supports. Frame height, beam spacing, beam capacity, and upright configuration must be reviewed together for the intended loads. Heavy materials do not justify assuming that an existing frame can accept another level or greater lane depth. Selective rack suits supplies needing individual pallet access, while drive-in offers another dense arrangement with forklift travel inside storage lanes. Adding compatible components to existing rack requires verified connections, dimensions, and structural capacity. There is no universal conversion that makes every rack suitable for pushback service. Record the heaviest operating loads Balance depth with order access Prepare delivery and handover Call (505) 436-7469: (505) 436-7469 ## Bring Your Loaded Pallet Details (505) 436-7469 ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Questions About Materials and Project Access - Which contracting supplies arrive on consistent pallets with known loaded weights? - Would deeper lanes delay access to materials allocated to separate projects? - Can forklifts approach the shared face squarely while order assembly continues nearby? ## Contractor Storage Purchase Questions ### Can Tijeras contracting loads include loose equipment? ### Can I retrieve a project pallet from behind another order? ### Will heavier supplies require wider beam spacing? ### Does one working face remove the need for staging? ## Compare Pallet Access Arrangements ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/tijeras ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/tijeras/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://albuquerquepalletrack.com/service-area/tijeras/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://albuquerquepalletrack.com/service-area/tijeras/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/tijeras/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/tijeras/warehouse-relocation ## Storage Support Around Tijeras Cart lane storage in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/pushback-rack Cart lane storage in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/pushback-rack Cart lane storage in Bernalillo: https://albuquerquepalletrack.com/service-area/bernalillo/pushback-rack Cart lane storage in Corrales: https://albuquerquepalletrack.com/service-area/corrales/pushback-rack Cart lane storage in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/pushback-rack Cart lane storage in Belen: https://albuquerquepalletrack.com/service-area/belen/pushback-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Review Your Material Handling Plan (505) 436-7469 (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/tijeras/pushback-rack#service", "name": "Pushback Rack in Tijeras, NM", "serviceType": "Pushback Rack", "url": "https://albuquerquepalletrack.com/service-area/tijeras/pushback-rack", "description": "Two to six pallets deep from one aisle, without giving up much reach.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Tijeras", "item": "https://albuquerquepalletrack.com/service-area/tijeras" }, { "@type": "ListItem", "position": 4, "name": "Pushback Rack", "item": "https://albuquerquepalletrack.com/service-area/tijeras/pushback-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Tijeras contracting loads include loose equipment?", "acceptedAnswer": { "@type": "Answer", "text": "Not without an appropriate supported load format accepted for the system. Carts are selected around specific pallet contact and loading conditions, so irregular equipment needs separate evaluation rather than improvised placement." } }, { "@type": "Question", "name": "Can I retrieve a project pallet from behind another order?", "acceptedAnswer": { "@type": "Answer", "text": "Not directly. The front pallets must leave first, which is why separate project allocations may need distinct lanes or selective positions even when they contain the same material." } }, { "@type": "Question", "name": "Will heavier supplies require wider beam spacing?", "acceptedAnswer": { "@type": "Answer", "text": "Weight does not establish spacing by itself. Loaded height, cart clearances, beam selection, frame height, and structural ratings must be considered together before setting or changing storage levels." } }, { "@type": "Question", "name": "Does one working face remove the need for staging?", "acceptedAnswer": { "@type": "Answer", "text": "No. Push back racking shares loading and picking access, but contractor order assembly still needs space outside that approach so selected loads do not obstruct replenishment or the next retrieval." } } ] } ] ```