--- title: "Pushback Rack in Grants, NM | Lane Design & Installation" url: https://albuquerquepalletrack.com/service-area/grants/pushback-rack description: "Plan new pushback rack service in Grants with lane sizing, layout, and managed installation. Call 505-436-7469 to discuss pallet storage." lang: en --- Image: Pushback Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/pushback-hero-Dus20JX9.jpg) Grants, New Mexico # Pushback Rack in Grants, NM Pushback rack in Grants puts multiple pallets of the same SKU behind one loading position, helping reserve more floor area for inventory rather than repeated aisles. Pallets ride on two to six deep nested carts running along inclined rails. Loading pushes the stored pallets rearward; removing the front pallet lets the next cart advance under controlled forklift handling. That last-in, first-out sequence suits reserve stock that does not require strict receipt-date picking. For mining support inventory near the I-40 West industrial frontage, start with pallets per SKU and replenishment patterns, not the deepest available lane. A shallow lane that stays occupied can be more useful than a deeper lane divided among too many part numbers. (505) 436-7469 ## Push back racking components and capacities Every storage level needs a specified beam pair and a compatible cart-and-rail assembly. Beam capacity must match the loads transferred by the selected system; dividing a total bay weight evenly is not a substitute for the manufacturer’s loading criteria. Frame height and vertical beam spacing determine usable levels alongside pallet height, lift reach, and overhead clearance. Upright capacities must be checked against the actual configuration, including the unsupported spacing between levels and the combined loads carried by the frame. One working face handles both storage and retrieval. That arrangement can reduce aisle count compared with selective rack, while selective storage gives direct access to every pallet. Drive-in storage also provides deep lanes, but requires the truck to enter the rack rather than place pallets onto carts from the aisle. Existing uprights do not automatically accept new cart tracks. Connection geometry, frame ratings, beam profiles, and system-specific supports require review before any reuse is proposed. This is not a universal conversion; a separate new installation may be the appropriate starting point. Count the reserve stock Measure the handling envelope Resolve the lane schedule Coordinate the work area Call (505) 436-7469: (505) 436-7469 ## Pushback rack planning with a defined scope As a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, we provide new rack systems with planning grounded in pallet dimensions, handling equipment, and the inventory assigned to each lane. Our scope connects cart selection with supporting rack specifications. A proposal should identify lane depth, pallet weight limits, usable storage levels, and the operating assumptions behind the layout, so purchasing can compare complete systems rather than isolated components. Installation is coordinated through managed crews. Receiving access, material staging, and available work areas belong in that coordination, particularly when a western corridor location makes an incomplete site survey costly to resolve with another visit. Count the reserve stock Measure the handling envelope Resolve the lane schedule Image: High-density pushback rack lanes loaded with pallets (https://albuquerquepalletrack.com/assets/pushback-2-ChZwIk2o.jpg) Image: Pushback pallet racking showing cart rails and load beams (https://albuquerquepalletrack.com/assets/pushback-3-ChKlQnZE.jpg) ### Keep receiving routes usable Grants service area: https://albuquerquepalletrack.com/service-area/grants Mining support Energy services Regional distribution Building supply ## Pushback Rack from Stock List to Installation 1 ### Count the reserve stock List each SKU’s normal and peak pallet quantities. Separate products with date-sensitive rotation from candidates for LIFO storage, then compare two-, three-, and deeper-lane assignments against realistic occupancy. 2 ### Measure the handling envelope Record pallet construction, loaded weight, overhang, truck turning space, and lift height. Include clear access from receiving so the proposed rack face does not become a holding area for incoming freight. 3 ### Resolve the lane schedule Review lane depths, beam elevations, frame heights, and stated capacities together. Check how a partly empty lane affects available locations before choosing the final number of storage positions. 4 ### Coordinate the work area Agree on delivery access, staging boundaries, and installation sequencing with managed crews. Keep the active receiving route separate from the assembly area and review loading instructions before stock enters the system. ## Request a lane-by-lane proposal (505) 436-7469 ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Questions before choosing lane depth - How many pallets of each mining support SKU remain on hand between replenishments, and which items need direct access instead of sharing a deep lane? - For a Santa Fe Avenue building, where do columns, door openings, and forklift turns constrain the rack face and the clearance behind the proposed frames? - Can your pallets consistently engage the specified carts without broken boards, excess overhang, or changing load shapes that interfere with neighboring lanes? ## Pushback rack questions answered ### Can mixed building supply stock share one lane? ### What measurements matter in a Grants building? ### Will trucks need access behind the rack? ### Can current frames become pushback pallet rack? ## Compare other storage formats ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/grants ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/grants/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://albuquerquepalletrack.com/service-area/grants/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://albuquerquepalletrack.com/service-area/grants/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/grants/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/grants/warehouse-relocation ## Western corridor service areas Cart lane storage in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/pushback-rack Cart lane storage in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/pushback-rack Cart lane storage in Bernalillo: https://albuquerquepalletrack.com/service-area/bernalillo/pushback-rack Cart lane storage in Corrales: https://albuquerquepalletrack.com/service-area/corrales/pushback-rack Cart lane storage in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/pushback-rack Cart lane storage in Belen: https://albuquerquepalletrack.com/service-area/belen/pushback-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Discuss your pallet inventory (505) 436-7469 (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/grants/pushback-rack#service", "name": "Pushback Rack in Grants, NM", "serviceType": "Pushback Rack", "url": "https://albuquerquepalletrack.com/service-area/grants/pushback-rack", "description": "Two to six pallets deep from one aisle, without giving up much reach.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Grants", "item": "https://albuquerquepalletrack.com/service-area/grants" }, { "@type": "ListItem", "position": 4, "name": "Pushback Rack", "item": "https://albuquerquepalletrack.com/service-area/grants/pushback-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can mixed building supply stock share one lane?", "acceptedAnswer": { "@type": "Answer", "text": "Assign a lane to one SKU when possible. Mixing items puts rear pallets behind unrelated front stock, so selective bays may be better for small quantities or frequently changing assortments." } }, { "@type": "Question", "name": "What measurements matter in a Grants building?", "acceptedAnswer": { "@type": "Answer", "text": "Provide clear height, column locations, door positions, and pallet load heights. These measurements help establish frame height and beam spacing before a layout is developed." } }, { "@type": "Question", "name": "Will trucks need access behind the rack?", "acceptedAnswer": { "@type": "Answer", "text": "Normal loading and picking occur at the same front face. The plan still needs room for building access and handling clearances; removing rear picking access does not eliminate every clearance requirement." } }, { "@type": "Question", "name": "Can current frames become pushback pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Only after system compatibility and load ratings are verified. Photos alone cannot establish that existing connections and members support the proposed carts, rails, and loaded lanes." } } ] } ] ```