Cantilever Rack in Corrales, NM

Cantilever Racking for Smaller Working Spaces

Protect Room for Production Movement

Corrales service area

Arm length is selected around supported load depth, while individual capacity concerns the weight transferred onto each arm. Upright spacing governs bearing along the product length. These decisions work together, but they are not interchangeable: a deeper arm cannot compensate for unsuitable spacing beneath flexible sheet or lumber.

Short retained pieces deserve specific positions. If they cannot bridge the supports arranged for full lengths, placing them loosely across that run is not an adequate solution. Group materials by length and stiffness, and identify which products need different arm levels or another storage format.

A single-sided row may use a perimeter location with one working aisle. A double-sided arrangement can serve opposing faces only if both remain accessible. Forklift or side-loader dimensions, carried load length, and withdrawal space should be reviewed before deciding that a freestanding row fits.

Indoor placement protects the storage operation from direct outdoor exposure, while outdoor cantilever rack requires discussion of high desert wind, heat, and the material's weather sensitivity. Compare selective pallet rack for palletized supplies; the open arm system is particularly relevant where long products would be obstructed by front columns.

Describe the production stock

List full lengths, part lengths, bundle depths, and weights alongside the materials consumed during fabrication. Identify items picked by hand and those moved mechanically so the proposed positions reflect actual daily handling.

Measure the available approach

Show door openings, work areas, and the route from receiving to storage. Include the space occupied by a long load during movement, not just the dimensions of the handling equipment without material.

Choose the support arrangement

Review arm depth, capacity, and upright spacing against each material group. Consider straight or inclined arms and retaining lips where product shape creates a rolling concern, rather than specifying identical arms throughout.

Prepare the installation area

Coordinate stock clearance and equipment entry around the agreed work zone. Discuss loading assignments at handover so staff understand which lengths belong together and which positions have different support or capacity limits.