--- title: "Cantilever Rack in Bernalillo, NM" url: https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack description: "Plan Bernalillo cantilever rack for lumber, pipe and building materials with clear loading access. Review your layout at 505-436-7469." lang: en --- Image: Cantilever Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/cantilever-hero-3ef0AkpP.jpg) Bernalillo, New Mexico # Cantilever Rack in Bernalillo, NM Cantilever rack in Bernalillo lets construction supply operators reach a required long bundle without shifting unrelated material from the loading face. Rear uprights carry projecting arms, leaving no front columns between the truck and stored lumber, pipe, tube, bar, or sheet products. Along the US 550 corridor and within Sandoval County industrial parks, building materials distribution requires a layout that connects storage with dispatch. An open face does not solve congestion by itself. The plan must leave room for the carried load, its approach angle, and stock waiting to move toward outbound vehicles. (505) 436-7469 ## Coordinate Cantilever Racking with Dispatch 1 ### Map the dispatch overlap Identify where incoming bundles wait while outbound orders are assembled. Mark routes between the receiving area, proposed storage faces, and dispatch staging before deciding how much row length the building can accommodate. 2 ### Sort products by support needs Supply dimensions, weights, and packaging descriptions for each material family. Distinguish lumber packs, metal bundles, sheet products, and loose lengths so arm spacing is not selected around a misleading average. 3 ### Check access from each face Review the loaded truck envelope beside single-sided and double-sided alternatives. Include the space required to draw a bundle clear of the arms before turning toward the next part of its route. 4 ### Set the installation sequence Agree which areas can be cleared and how equipment enters the building. Review the final arm positions and assigned stock with operating staff so loading practices follow the intended support arrangement. ## Cantilever Rack Geometry for Mixed Materials Choose arm length around the depth of the material being supported. Then establish individual arm capacity from the intended loading, including how bundle weight reaches each bearing point. Upright and base selection must reflect the complete configuration; an arm rating alone cannot approve an entire row. Spacing between uprights determines where a long product is supported. Flexible lumber and sheet material can require a different pattern from stiff metal sections. Check the shortest stocked length as well as the longest, since a remnant that fails to reach enough arms needs another storage arrangement. Single-sided rows allow loading from one face and may suit the perimeter. Double-sided rows place arms on both sides of the uprights, requiring access to each face. Review forklift turning and withdrawal with the actual load length, or evaluate side-loader access where that is the handling method. Indoor placement and outdoor cantilever rack should not be treated as interchangeable decisions. Exposed rows bring high desert wind, heat, and weather contact into the discussion. Selective pallet rack is a useful comparison for packaged pallet inventory, while open arm storage addresses the access restrictions front columns create for long stock. Map the dispatch overlap Sort products by support needs Check access from each face Set the installation sequence Call (505) 436-7469: (505) 436-7469 ## Cantilever Rack Planning Beyond the Storage Face We look at picking conditions as closely as full-bundle storage. A construction supply range can include long packaged products beside short remainders and loose round stock. Those materials need deliberate support assignments rather than a shared position chosen only because it is vacant. The supplying and installing experience behind our division of Warehouse Equipment & Supplies Co. dates to 1997, with installation crews scheduled and managed around the agreed plan. We discuss access boundaries and material clearance before assigning installation activity. Our cantilever racking review connects the storage faces to the busiest dispatch movements. Where I-25 North traffic influences receiving and shipping schedules, the internal layout should preserve staging space instead of extending rows into every available opening. Map the dispatch overlap Sort products by support needs Check access from each face Image: Cantilever warehouse racking holding steel tubing (https://albuquerquepalletrack.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://albuquerquepalletrack.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Leave Space for Outbound Bundles Bernalillo service area: https://albuquerquepalletrack.com/service-area/bernalillo Construction supply Building materials Regional distribution Light manufacturing ## Review Your Material and Dispatch Lists (505) 436-7469 ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Questions Before Extending a Row - Which building materials need additional bearing to avoid sagging between supports? - How often do outbound orders leave short lengths behind in storage? - Can both loading faces remain accessible during overlapping receiving and dispatch? ## Building Supply Storage Explained ### Can Bernalillo building suppliers mix lumber and pipe? ### Do round products need different arms? ### Does a side-loader remove the need to review aisles? ### When should palletized stock remain outside the arm layout? ## Consider Other Storage Formats ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/bernalillo ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://albuquerquepalletrack.com/service-area/bernalillo/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/bernalillo/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/bernalillo/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/bernalillo/warehouse-relocation ## Planning Along the Northern Corridors Long-load storage in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack Long-load storage in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/cantilever-rack Long-load storage in Corrales: https://albuquerquepalletrack.com/service-area/corrales/cantilever-rack Long-load storage in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/cantilever-rack Long-load storage in Belen: https://albuquerquepalletrack.com/service-area/belen/cantilever-rack Long-load storage in Santa Fe: https://albuquerquepalletrack.com/service-area/santa-fe/cantilever-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Talk Through Your Loading Faces (505) 436-7469 (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack#service", "name": "Cantilever Rack in Bernalillo, NM", "serviceType": "Cantilever Rack", "url": "https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Bernalillo", "item": "https://albuquerquepalletrack.com/service-area/bernalillo" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Bernalillo building suppliers mix lumber and pipe?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, within an arrangement selected for both products. They may need separate levels or runs because bearing requirements, rolling behavior, bundle depth, and load distribution are not necessarily alike." } }, { "@type": "Question", "name": "Do round products need different arms?", "acceptedAnswer": { "@type": "Answer", "text": "They can. Inclined arms or retaining lips may be appropriate where rolling is a concern. Select the arm form around the actual material and its packaging rather than applying one detail everywhere." } }, { "@type": "Question", "name": "Does a side-loader remove the need to review aisles?", "acceptedAnswer": { "@type": "Answer", "text": "No. Its loaded travel and placement requirements still govern access. Check the equipment dimensions and material envelope against the proposed faces, staging areas, and connecting routes before fixing the row layout." } }, { "@type": "Question", "name": "When should palletized stock remain outside the arm layout?", "acceptedAnswer": { "@type": "Answer", "text": "Keep it separate when selective bays better match its packaging and handling. Cantilever storage rack is intended to support accessible long material, not to replace every other storage arrangement in a distribution building." } } ] } ] ```