--- title: "Cantilever Rack in Belen, NM" url: https://albuquerquepalletrack.com/service-area/belen/cantilever-rack description: "Size Belen cantilever rack around building products, bundle weights and support spacing. Discuss your long material layout at 505-436-7469." lang: en --- Image: Cantilever Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/cantilever-hero-3ef0AkpP.jpg) Belen, New Mexico # Cantilever Rack in Belen, NM Cantilever rack in Belen supports long building products according to their weight and bearing points, rather than the number of empty positions visible in a warehouse. Arms project from uprights without front columns, leaving the loading face open for pipe, bar, tube, lumber, and sheet material. Rail-served distribution around the BNSF rail corridor and Camino del Llano industrial area makes receiving patterns part of the design discussion. Incoming bundles may need temporary staging before they reach assigned arms. That movement should be considered alongside storage depth, support spacing, and the equipment carrying each load. (505) 436-7469 ## Cantilever Racking Decisions Start with Weight A heavy bundle deserves more scrutiny than a familiar footprint. We ask how its weight is distributed, whether packaging keeps it together, and how operators separate partial quantities. The answers help distinguish a full-bundle position from a location that must also accommodate loose lengths. Our operation is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, and we coordinate installation around the agreed equipment scope. Crew scheduling includes discussion of receiving access and the areas your staff will release for work. Cantilever racking proposals should make the load assumptions visible. We discuss arm ratings and upright arrangements with the intended stock list, rather than treating a previous storage configuration as evidence that a heavier product belongs there. Document arriving bundles Assign the support pattern Connect storage with dispatch Image: Cantilever warehouse racking holding steel tubing (https://albuquerquepalletrack.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://albuquerquepalletrack.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Keep Receiving Routes Available Belen service area: https://albuquerquepalletrack.com/service-area/belen Rail-served distribution Bulk commodities Building products Manufacturing ## Plan Cantilever Rack Around Receiving 1 ### Document arriving bundles Provide product lengths, depths, weights, and packaging details for rail-fed or truck-fed receipts. Include the smaller quantities left after orders are picked so the design does not address incoming stock alone. 2 ### Assign the support pattern Group materials by the bearing they need and the depth they occupy. Review arm lengths, upright spacing, and component capacities before deciding which products can share a run or storage level. 3 ### Connect storage with dispatch Map the trip from receiving to each loading face and onward to outbound staging. For I-25 South freight movements, preserve internal room for bundles awaiting collection rather than allowing storage positions to absorb it. 4 ### Confirm the working arrangement Review installation access and the proposed stock assignments together. Once the arrangement is established, explain the loading limits and intended material positions to the people who will replenish and pick from it. ## Cantilever Rack Support for Building Products Individual arm capacity must match the load carried by that arm, not merely an evenly divided bundle weight assumed on paper. Uneven material placement can change the distribution. Arm length also needs to support the load depth, with product positioning defined before the arrangement is put into service. Support spacing is a separate decision from arm depth. Long steel sections and flexible lumber do not necessarily span the same distance acceptably. Sheet products need suitable bearing, while short remnants may require their own positions because they cannot reach supports intended for full lengths. Single-sided layouts provide access from one aisle and can organize perimeter stock. Double-sided rows offer opposing loading faces where room allows. Compare those options using the actual forklift or side-loader approach, including bundle length during withdrawal and the route back toward receiving. An indoor cantilever rack keeps the design discussion focused on building space and internal movement. Outdoor rows also require consideration of high desert wind, heat, and material exposure. Selective pallet rack may remain the better home for packaged pallet loads; open arms address products whose length makes front columns restrictive. Document arriving bundles Assign the support pattern Connect storage with dispatch Confirm the working arrangement Call (505) 436-7469: (505) 436-7469 ## Bring Your Bundle Specifications (505) 436-7469 ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Resolve Bundle and Bearing Details - What are the actual weights of the heaviest incoming building product bundles? - Which partial bundles lose their original packaging during order picking? - Where can long loads wait without occupying the truck approach to storage? ## Answers for Heavy and Long Stock ### Should Belen rail receipts determine every storage position? ### Can heavier bundles use the same arms as lighter stock? ### Are double-sided rows always the better use of space? ### What distinguishes cantilever storage rack from pallet bays? ## Separate Pallet Loads from Long Material ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/belen ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://albuquerquepalletrack.com/service-area/belen/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/belen/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://albuquerquepalletrack.com/service-area/belen/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/belen/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/belen/warehouse-relocation ## Discuss South Valley Storage Needs Long-load storage in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack Long-load storage in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/cantilever-rack Long-load storage in Bernalillo: https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack Long-load storage in Corrales: https://albuquerquepalletrack.com/service-area/corrales/cantilever-rack Long-load storage in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/cantilever-rack Long-load storage in Santa Fe: https://albuquerquepalletrack.com/service-area/santa-fe/cantilever-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Review Your Load Distribution (505) 436-7469 (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/belen/cantilever-rack#service", "name": "Cantilever Rack in Belen, NM", "serviceType": "Cantilever Rack", "url": "https://albuquerquepalletrack.com/service-area/belen/cantilever-rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Belen", "item": "https://albuquerquepalletrack.com/service-area/belen" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://albuquerquepalletrack.com/service-area/belen/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Should Belen rail receipts determine every storage position?", "acceptedAnswer": { "@type": "Answer", "text": "No. Incoming bundles establish important requirements, but split orders and remnants also need support. Plan positions for the material conditions that remain after receiving packaging has been opened." } }, { "@type": "Question", "name": "Can heavier bundles use the same arms as lighter stock?", "acceptedAnswer": { "@type": "Answer", "text": "Only if the selected arms and complete arrangement are rated for that loading. Similar dimensions do not establish equivalent weight, and the load carried at each support must be checked." } }, { "@type": "Question", "name": "Are double-sided rows always the better use of space?", "acceptedAnswer": { "@type": "Answer", "text": "No. They require accessible working faces on both sides. A single-sided arrangement may fit better when receiving routes, perimeter space, or loaded truck movements restrict the available aisle layout." } }, { "@type": "Question", "name": "What distinguishes cantilever storage rack from pallet bays?", "acceptedAnswer": { "@type": "Answer", "text": "Projecting arms leave the front unobstructed for long products. Pallet bays support palletized goods between uprights, making the choice depend on material shape, packaging, and the required handling method." } } ] } ] ```