--- title: "Cantilever Rack in Albuquerque, NM" url: https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack description: "Plan cantilever rack for Albuquerque bar, tube, lumber and sheet storage. Discuss arm capacity and forklift access at 505-436-7469." lang: en --- Image: Cantilever Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/cantilever-hero-3ef0AkpP.jpg) Albuquerque, New Mexico # Cantilever Rack in Albuquerque, NM Cantilever rack in Albuquerque gives long material an open loading face instead of forcing operators to thread bundles between front columns. Horizontal arms extend from rear uprights, giving bar, pipe, tube, lumber, and sheet products room to project along the run while remaining supported at planned intervals. For film and production logistics in Westside Industrial or Mesa del Sol, changing material lengths can matter as much as inventory volume. Start with the longest pieces, shortest reusable remnants, bundle depths, and actual weights. Those details establish whether one arrangement can serve the stock or separate support patterns are necessary. (505) 436-7469 ## Cantilever Rack Arms, Supports and Access Arm length follows load depth; individual arm capacity follows the weight actually carried at each support. Upright spacing must also account for material stiffness and permitted overhang. Short sections may miss supports arranged for long bundles, while flexible sheet or lumber can sag across an unsuitable span. Single-sided rows can suit perimeter storage where access is needed from one face. Double-sided uprights serve material from opposing aisles, but both approaches need working room. The extra storage face is useful only when operators can enter, align their forks, and withdraw without swinging a long load into adjacent inventory. Straight or inclined arms and retaining lips should reflect the material being stored. Round pipe requires consideration of rolling, whereas flat stock raises different contact and support questions. Mixed products should not share an arm position merely because the bundle widths appear similar. Indoor and outdoor cantilever rack layouts require separate exposure discussions. Outdoor storage introduces high desert wind, heat, and weather contact with materials. Selective pallet rack remains appropriate for palletized loads needing individual access; the open arm arrangement addresses long products that do not fit naturally between front columns. Separate the material families Trace the loaded approach Review the component arrangement Arrange installation access Call (505) 436-7469: (505) 436-7469 ## Cantilever Rack Planning for Changing Materials We approach cantilever racking as a relationship between material and handling equipment. An arm must reach beneath the intended load depth without encouraging unsupported placement, while the upright and base must suit the complete arrangement. A capacity figure for one component does not describe every possible configuration. As a division of Warehouse Equipment & Supplies Co., we have been supplying and installing since 1997, bringing equipment planning and installation coordination into the same discussion. We schedule and manage installation crews with agreed access areas and responsibilities for clearing material. Older mid-clear buildings and newer Westside facilities present different working envelopes. We review usable height, existing circulation, and the space needed to approach a long bundle before proposing arm levels. Separate the material families Trace the loaded approach Review the component arrangement Image: Cantilever warehouse racking holding steel tubing (https://albuquerquepalletrack.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://albuquerquepalletrack.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Allow for the Loaded Turning Path Albuquerque service area: https://albuquerquepalletrack.com/service-area/albuquerque Aerospace and defense Film and production logistics Food and beverage distribution Third-party logistics ## Review Your Cantilever Racking Arrangement 1 ### Separate the material families List full lengths, remnants, bundle dimensions, and weights by product. Identify loose pieces and packaged stock separately so support spacing is based on handling conditions rather than an average inventory description. 2 ### Trace the loaded approach Show how a forklift or side-loader reaches each proposed face. Include the carried material length when reviewing turns, staging, and withdrawal space, particularly where South Broadway receiving routes connect with internal storage aisles. 3 ### Review the component arrangement Examine arm lengths, individual ratings, upright spacing, and intended elevations together. Confirm which products belong at each level and how shorter pieces will receive adequate support without improvising their placement. 4 ### Arrange installation access Agree on released work areas and material entry before installation begins. Review the completed arrangement against the intended loading pattern so operators understand the assigned positions and component limits. ## Share Your Material Schedule (505) 436-7469 ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Questions About Length and Movement - Which production materials change length most often between incoming shipments? - Can the shortest retained pieces reach enough arms in the proposed layout? - Will either storage face interfere with loaded forklift turns or outbound staging? ## Long Material Storage Answers ### Can Albuquerque production operations store changing lengths together? ### Does removing front columns eliminate aisle requirements? ### Is arm capacity the same as total row capacity? ### When is selective storage the better comparison? ## Compare Pallet and Long Stock Storage ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/albuquerque ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://albuquerquepalletrack.com/service-area/albuquerque/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/albuquerque/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://albuquerquepalletrack.com/service-area/albuquerque/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/albuquerque/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/albuquerque/warehouse-relocation ## Storage Planning Across the Metro Long-load storage in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/cantilever-rack Long-load storage in Bernalillo: https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack Long-load storage in Corrales: https://albuquerquepalletrack.com/service-area/corrales/cantilever-rack Long-load storage in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/cantilever-rack Long-load storage in Belen: https://albuquerquepalletrack.com/service-area/belen/cantilever-rack Long-load storage in Santa Fe: https://albuquerquepalletrack.com/service-area/santa-fe/cantilever-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Discuss Your Open Face Layout (505) 436-7469 (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack#service", "name": "Cantilever Rack in Albuquerque, NM", "serviceType": "Cantilever Rack", "url": "https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Albuquerque", "item": "https://albuquerquepalletrack.com/service-area/albuquerque" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://albuquerquepalletrack.com/service-area/albuquerque/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Albuquerque production operations store changing lengths together?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when every length receives suitable support. Separate remnants from full bundles if the shorter pieces cannot bridge the planned arms, and reassess weight distribution when the product mix changes." } }, { "@type": "Question", "name": "Does removing front columns eliminate aisle requirements?", "acceptedAnswer": { "@type": "Answer", "text": "No. The open face improves access to long stock, but the truck and its carried load still need room to align, lift, withdraw, and turn without contacting neighboring material." } }, { "@type": "Question", "name": "Is arm capacity the same as total row capacity?", "acceptedAnswer": { "@type": "Answer", "text": "No. Each arm has its own rating, while uprights and the assembled arrangement have additional limits. Review the intended loading across supports rather than adding ratings without checking the configuration." } }, { "@type": "Question", "name": "When is selective storage the better comparison?", "acceptedAnswer": { "@type": "Answer", "text": "Choose the comparison around packaging. Palletized production supplies may suit selective bays, while cantilever storage rack provides unobstructed access for long bundles requiring support along their length." } } ] } ] ```